1. Remove the test stick from foil pouch just prior to use.
* NOTE : If the test stick has been stored in refrigerator, allow it to warm to room temperature.
2. Remove the cap to expose the absorbent tip.
3. Hold the test stick by its thumb grip and point the absorbent tip to downward.
4. Place absorbent tip in flowing urine for atleast 5 seconds. The absorbent tip has to be wetted fully with flowing urine.
5. To get a correct test result, place the test stick on the flat surface with window facing up.
You may see moving red color across the result window soon.
6. Wait for 5 minutes to read the most accurate result.

1. Collect urine in clean and dry container.
2. Remove the test stick from foil pouch just prior to use.
   * NOTE : If the test stick has been stored in refrigerator, allow it to warm to room temperature.
3. Remove the cap to expose the absorbent tip.
4. Hold the test stick tightly and dip the absorbent tip into the urine specimen the minimum for 3-5 seconds.
5. Remove the test stick from the urine specimen and place it on the flat surface.
   And you may see moving red color on the result window.
6. Wait for 5 minutes and read the result.

1. Bring all materials and specimen to room temperature, and then open the foil pouch and place the device on a clean, dry and level surface. Note : Once the foil pouch is opened, the device should be used as soon as possible.
2. Use the disposable pipette to deliver 4 drops of urine into the sample well. The test device should not be handled or moved until the test is complete and ready for reading.
3. Wait for 5 minutes and then read the results.

Result Interpretation

Order Information